What Is Kyphoplasty?

What is kyphoplasty, how a balloon and bone cement repair a spinal compression fracture, what to expect on the day, and recovery.

11/07/26  •  45 Views

Orthopedics
Dr. Mohamed Ibrahim avatar
Dr. Mohamed Ibrahim
Physician-scientist · Founder, MedicalVideos.com
Dr. Ibrahim founded MedicalVideos.com in 2007 to make medical and surgical education freely accessible to students, clinicians, and patients. Dr. Ibrahim is an Assistant Professor of Medicine (Transplant Nephrology) at the University of Maryland School of Medicine and is board certified in Internal Medicine (ABIM).
Last reviewed: 11/07/26

A vertebral compression fracture can make ordinary things — rolling over in bed, standing up from a chair, coughing — suddenly painful. Kyphoplasty is a minimally invasive procedure designed for exactly that problem: a collapsed spinal bone is steadied from the inside, using a tiny balloon and a small amount of bone cement. If you've been offered it, here's what the day itself actually looks like.

The video at the top of this page, "Repairing Spinal Fractures with Balloon Kyphoplasty," runs a little over three minutes. In it, interventional radiologist Dr. Bruce Wolf at Detroit Medical Center performs the procedure for a patient with severe back pain from spinal compression fractures, and its description notes the procedure is especially relevant for people whose fractures come from osteoporosis — the bone-thinning condition behind most compression fractures. Our guide to osteoporosis explains why weakened vertebrae can collapse under everyday loads.

Before you arrive

Expect imaging first. Your team will want recent pictures of your spine — usually an X-ray and often an MRI — to confirm which vertebra has collapsed, how recent the fracture is, and whether the shape of the collapse suits this approach. You'll be asked about the medicines you take, especially blood thinners, and about allergies. Because sedation is commonly used, you'll usually be told not to eat or drink for a set period beforehand, and to arrange for someone to take you home afterwards.

It also helps to know how a compression fracture differs from other breaks. A long bone in the arm or leg snaps; a vertebra tends to crumple, losing height at the front and taking on a wedge shape. Our overview of how broken bones are treated covers the broader picture, but the spine version is its own problem — the bone sits next to the spinal cord, and simply waiting in a brace isn't always enough when the pain won't settle.

Lying face-down under the X-ray arm

On the day, you'll be positioned face-down on a procedure table, with supports under your chest and hips so your back is exposed and steady. This happens in a fluoroscopy suite — the room you can see in the video above, with its large C-shaped X-ray arm and the live spine pictures on the monitors beside the table. The team wears lead aprons because that imaging runs, in short bursts, throughout the procedure.

Most people have sedation plus numbing medicine in the skin of the back, though some centres use a general anaesthetic. Either way, you shouldn't feel sharp pain; pressure and movement are more common reports. A small nick is made in the skin, and a hollow needle-like tube is guided through the back into the collapsed vertebra, its progress watched on the live X-ray images.

The balloon, then the cement

This is the step that gives balloon kyphoplasty its name — and separates it from its close relative, vertebroplasty, where cement is injected without a balloon step. Through the tube, a small balloon is passed into the vertebral body and gently inflated. The idea is twofold: to lift the collapsed bone back toward its original height where it can be lifted, and to compact the soft bone inside, leaving a small cavity.

The balloon is then deflated and removed, and that cavity is filled with a thick bone cement, injected slowly under X-ray guidance so the team can watch exactly where it goes. The cement hardens within minutes, forming an internal cast that holds the vertebra in its new position. If more than one level is being treated, the sequence repeats; afterwards the tube comes out and a small dressing covers the entry point — usually no stitches.

The first hours, and the days after

You'll typically rest on your back for a short observation period while the sedation wears off and the team checks your pain level, blood pressure and leg movements. Many people go home the same day. Some notice their fracture pain feels easier quite quickly; for others it eases more gradually, and soreness at the needle entry point is common for a few days either way.

Back home, follow the activity guidance you're given — teams usually encourage walking early while limiting bending, twisting and heavy lifting until your review. That review matters for a second reason, too: the fracture was a signal about your bone strength. If osteoporosis is behind it, treating the bone itself is what lowers the chance of the next fracture, which is why a bone density (DEXA) scan and a bone-health plan often follow. The short explainer on this page, "What is Osteoporosis" — just under two minutes — is a useful refresher before that conversation.

No procedure is risk-free, and the honest list here includes bleeding or infection at the entry point, cement leaking outside the vertebra (the team watches for this on the live imaging as they inject), and, rarely, cement or pressure affecting nearby nerves. Those possibilities, weighed against how severe your pain is and how the fracture is healing, are exactly what your pre-procedure discussion is for — bring your questions to it.

References & further reading

MedicalVideos.com has published trusted medical videos since 2007. The site was founded by Dr. Mohamed Ibrahim, MD, PhD — physician-scientist.

Frequently Asked Questions

Is kyphoplasty the same as vertebroplasty?
They're close relatives, not the same procedure. Both steady a fractured vertebra with bone cement. Kyphoplasty adds the balloon step first, which can restore some lost height and creates a cavity that lets the cement be placed more thickly and at lower pressure. Vertebroplasty injects cement directly, without inflating a balloon.

Will I be asleep during kyphoplasty?
Not usually fully asleep. Many procedures are done with sedation — you're drowsy and relaxed — together with numbing medicine in the back, though some centres use a general anaesthetic instead. Your team will confirm which approach they plan for you beforehand.

Does kyphoplasty straighten a hunched back?
It can restore some of the height lost at the treated vertebra, which may help posture at that level. But a long-standing curve built up from several old fractures won't be undone by treating one bone, so it's worth asking your team what change is realistic in your case.

Can a vertebra treated with cement fracture again?
The treated level is held by hardened cement, but the neighbouring vertebrae still carry the same bone-thinning that caused the first fracture, and they can collapse in turn. That's why follow-up bone-health treatment after a compression fracture matters as much as the procedure itself.

This article is for general education only and is not medical advice. It does not replace consultation with a qualified clinician. Sudden severe back pain after an injury, new leg weakness, numbness, or changes in bladder or bowel control need urgent medical assessment.

Dr. Mohamed Ibrahim
Physician-scientist · Founder, MedicalVideos.com
Dr. Ibrahim founded MedicalVideos.com in 2007 to make medical and surgical education freely accessible to students, clinicians, and patients.
Last reviewed: 11/07/26
Follow Medical Videos on FacebookJoin 5M followers for daily medical videos, expert explainers, and myths busted.
Follow
0 Comments
No comments found

Related Articles

The Medical Videos NewsletterOne email a week — the best new videos and guides. Free.